Shopping Cart

0

Your shopping bag is empty

Go to the shop

Readymade alloy 27.2 seatpost 0mm offset

$50.00

Everyone who has read too many articles on this site knows how we feel about crappy seatposts, 0mm seatposts for most bikes, and carbon.  The Readymade seatpost is 0mm, which we ONLY recommend for bikes with a seat tube angle between 70 and 72 degrees.  Our bikes all have 71...

Out Of Stock

Everyone who has read too many articles on this site knows how we feel about crappy seatposts, 0mm seatposts for most bikes, and carbon.  The Readymade seatpost is 0mm, which we ONLY recommend for bikes with a seat tube angle between 70 and 72 degrees.  Our bikes all have 71 degree seat tube angles, so if you are building a Tanglefoot, this is a fine seatpost for you. 

Off road rated so you know it's strong.  Decently lightweight.  Infinite micro adjustments with front and rear bolts.  

All seatposts are a bit finicky to set up, with the easiest being Nitto, and all others being a few degrees harder.  While the Readymade post is not hard to set up, it does require marginally more thought than a seatpost where the top of the clamp is all one piece.  In a way, the two top clamps are easier, as they move independently of each other.  But some folks might find it fussy.  We'll post a video with a how to soon!  I promise, it's not actually hard.  If you have installed any seatpost except a Nitto or a Nitto clone, you can do this post.  

Lighter than most 400mm seatposts due to the minimal, machined head.  No glue to come unbonded.  This style of seatpost has been around since the early 90's, and many top manufacturers, like Tune, still use this same style for it's blend of low weight and high strength.  Compatible with steel or Ti rails.  Dunno about carbon, but let's assume not.  

27.2mm 

0mm offset

X? amount of seatpost to center of rails showing when installed to min insertion mark.  

Made in Taiwan of 6000 series aluminum.